{"product_id":"chrysler-a604-41te-a606-42le-input-clutch-drum-kit-retainer-no-bevel-caravan","title":"Chrysler A604 41TE A606 42LE Input Clutch Drum Kit Retainer No Bevel Caravan","description":"\u003cp\u003e\u003cstrong\u003eChrysler A604 41TE A606 42LE Input Clutch Drum Kit Retainer No Bevel Caravan\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUsed OEM unit pulled from an inspected donor transmission, cleaned and visually inspected before listing. Photos show a representative unit of this exact part and variant — see the fitment and casting notes below to confirm your match.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e M-A604-DR-U-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e You receive one used A604\/A606 input clutch retainer — the input drum itself, in the without-bevel (1990-96) configuration — exactly as pictured. The supplier grades it \"good used\" and checked, not tested and not rebuilt. Buffalo Engine Components' own terms state plainly that interior components are NOT guaranteed complete or correctly assembled, so treat any pistons, springs, snap rings or plates still sitting in the drum as a bonus, not a promise: inspect everything before it goes in your build. Whatever internal pieces are visible in the listing photos are what ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 30-day return-or-replace after delivery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping:\u003c\/strong\u003e UPS Ground from our Tennessee warehouse, 2 business day handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOEM \/ interchange references\u003c\/strong\u003e (verify against your casting\/tag):\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5016198AA\u003c\/li\u003e\n\u003cli\u003e92554AK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e (engine\/year matters — read carefully): This is the non-beveled input clutch retainer (input drum) for Chrysler's A604 Ultradrive four-speed family — badged 40TE, 41TE, 41TES and 41AE — and for the A606\/42LE, model years 1990 through 1996. On the A604 side that covers the 2.0L and 2.4L four-cylinders and the 2.5L, 3.0L, 3.3L and 3.8L V6s in the Dodge Caravan and Grand Caravan, Plymouth Voyager and Grand Voyager, Chrysler Town \u0026amp; Country, Dodge Dynasty and Spirit, Plymouth Acclaim, Chrysler New Yorker, Fifth Avenue, Imperial and LeBaron, Dodge Shadow, Dodge Daytona and Plymouth Sundance, plus the 1995-96 Chrysler Cirrus, Dodge Stratus and 1996 Plymouth Breeze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e The trap is the bevel — and then the casting number behind it. Before you order, do two checks on the drum you are replacing. 1) BEVEL \/ LIP. Pull your input clutch retainer and look at the machined face where the drum meets the pump stator support. The 1989 drum has a bevel — a chamfered lip around that edge. From 1990 on, that lip is gone and the face is square. This listing is the WITHOUT-BEVEL drum. If your original has the bevel, you have a 1989 unit and this is not a plug-in swap — 1989 also runs the three-ring stator support, while 1990-up runs four rings, so the sealing-ring count on your pump stator has to match the drum you install. Count the rings on your stator: four rings means you are in the right family for this drum. 2) CASTING NUMBER. \"No bevel\" alone is not enough, because the 1997-and-up drums are also non-beveled but are a different casting. Read the raised casting number on the body of your drum.\u003c\/p\u003e\n\u003cp\u003eBefore you order: confirm your transmission code and casting\/part numbers. Not sure? Message us\nthrough eBay with your VIN or transmission tag and we will confirm fitment the same business day.\nRebuilder shops — ask about volume pricing. We stock transmission hard parts by family and can hold\ninventory for scheduled builds.\u003c\/p\u003e","brand":"Mopar","offers":[{"title":"Default Title","offer_id":54608578019627,"sku":"M-A604-DR-U-01","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0980\/0309\/1755\/files\/57_0a6af80b-1390-4747-98f1-460c0546f19b.jpg?v=1785254463","url":"https:\/\/huskparts.com\/products\/chrysler-a604-41te-a606-42le-input-clutch-drum-kit-retainer-no-bevel-caravan","provider":"Husk Parts ","version":"1.0","type":"link"}